Best Guaranteed REVOLOOP Tube 28″ REVO.RACE SV 40 mm

REVOLOOP tube 28″ REVO.RACE SV 40 mm

REVOLOOP.RACE is the new lightweight hose for the agile, demanding racer. The racing bike tube weighs only 39 grams and is also significantly more puncture-proof than a conventional butyl tube due to the specific material coordination of the thermoplastic polyurethane. The low weight reduces the rotating mass on the wheel and makes the racer more agile in sprints and on the track. In addition, REVOLOOP.RACE holds air many times longer than conventional butyl hoses. Constant pumping is therefore a thing of the past.
The valve made of particularly impact and break-resistant thermoplastic material is ahead of its time. Minimum weight paired with maximum performance. A specially designed, blind-welded valve foot prevents damage to the tube from sharp edges on the rim’s valve hole.

IMPORTANT: Please never fill your REVOLOOP tube outside of the jacket with a pressure of more than 0.5 bar. Otherwise there is a risk that the REVOLOOPs will locally overstretch or even burst. Both scenarios mean that the tube is then unusable because the overstretching of the tube does not deform it back and the tube can therefore no longer be installed. Therefore: only apply a pressure of more than 0.5 bar to REVOLOOP hoses when they are fully assembled.

Light and stable – REVOLOOP valves
The valves developed by REVOLOOP are made of a special, high-strength thermoplastic polyurethane. They combine the highest technical standards with minimal weight and sophisticated design. The internally welded valve foot plate protects the tube from damage caused by sharp edges on the valve hole in the rim and the dreaded valve tearing off.

Virtually seamless – REVOLOOP welding technology
REVOLOOP’s patent-pending welding process makes it possible for the first time to weld thermoplastic hoses with large wall thicknesses in such a way that an almost even seam can be produced. This technologically sophisticated process achieves perfect rolling comfort while at the same time providing the highest level of security against failure through snakebite and punctures.

Ecologically responsible – REVOLOOP material
Thermoplastic polyurethanes are recyclable plastics. Since both the tube material and the valve are made of TPU, REVOLOOP bicycle tubes can be completely recycled. Out of responsibility towards the environment.

Made in Germany! Technical specifications:

Material: Thermoplastic Polyurethane (TPU)
Area of intended use : road bike, triathlon, time trial
Compatible sizes (inches): 28 x 0.7 to 28 x 1.1
Compatible sizes (ETRTO): 18 – 622 to 28 – 622
Valve Length: 40mm
Valve standard: SV, changeable (Sclaverand/Presta)
Colour: white – transparent

Weight according to the manufacturer: 39g
Weight weighed: 38g Scope of delivery: 1x REVOLOOP tube 28 “REVO.RACE SV 40 mm

Note: The weights of the hoses may vary due to production.

EAN:
4260573071036

MPN:
SW10024