Latest MAXXIS Tire Minion DHR II 29 x 2,40 WT 3C MaxxGrip TR Downhill

MAXXIS tires Minion DHR II 29 x 2.40 WT 3C MaxxGrip TR Downhill

Are you ready for the next descent…

Contrary to the catchy name, it’s not a ride on a cannonball – with its completely new tread design, the Minion DHR II is the ideal tire for aggressive gravity rides.
With the side lugs of the legendary DHF, which have been slightly widened for even more cornering hold, it has great traction there. The center knobs are beveled to allow better acceleration and braking. The cut profile in the longitudinal direction makes turning into high-speed curves child’s play.

Wide Trail Casing (WT)
This special carcass construction optimizes the tread layout and tire shape on today’s wider rims. Traditional tires are developed for narrow rims and get a too square shape on wide rims and thus a less than optimal performance.
WT tires are optimized for an internal rim width of 35 mm, but work excellently on all rims with an internal dimension between 30 and 40 mm.

Tubeless Ready (TR)
tube tires have many advantages: You can drive with less air pressure. This gives better traction and reduces rolling resistance. And where there is no inner tube , the risk of punctures is also reduced. MAXXIS TR tires are better prepared for mounting with sealant than other “tubeless ready” tires. The bead of our TR tires is completely covered with a rubber layer like a real UST tubeless tube . As a result, tube installation is successful for all rims with standard dimensions the first time you pump it up and with little liquid.
Normal MAXXIS MTB tires can also be mounted tubeless with sealant like tires from other manufacturers, as the carcass fabric is very dense.
However, only the new MAXXIS TR models are officially approved for tubeless assembly and guaranteed by MAXXIS. The tubeless assembly of other models is at your own risk.

Note: We strongly advise against the use of sealant containing ammonia. Ammonia has been shown to attack the carcass and, depending on the amount used, can weaken it by up to 30% after just a few months.

Dual ply casing
Two gathered layers of fabric are wrapped around bead cores. This results in an extremely stable and safe carcass, which is particularly important when going downhill. There are four layers on the side walls and even six layers on the treads.

3C Maxx Grip
The well-known 3C downhill compound, which many of the best downhillers have trusted for years, is now called 3C MaxxGrip. 3C MaxxGrip offers the ultimate grip and cushioning properties for unrivaled downhill traction. Technical specifications:

Tire type: folding tires
Area of intended use : Enduro, All Mountain, Freeride
Size (inches): 29 x 2.40
Size (ETRTO): 61 – 622
Design: dual ply casing, TR
Rubber compound: 3C MaxxGrip
Carcass: 60 TPI x 2DW
E-bike compatibility: yes, up to 25 km/h
Profile: optimized for the rear wheel
Air Pressure: 35 – 50 PSI | 2.5 – 3.4 bars
Recommended inner rim width: optimal for 35 mm, 30-40 mm width also possible
Maximum load: not specified
Color: Black

Weight: 1265g (manufacturer information), 1276g (weighed myself) The weights of the tires can vary due to production! Scope of delivery: 1x MAXXIS tire Minion DHR II 29 x 2.40 WT 3C MaxxGrip TR Downhill

EAN:
4717784032986

MPN:
1313