Wheelset E-Bike 29 “AM EN | NONPLUS Components 6-hole hubs | Newmen carbon rims
intended use : E-Bike, All Mountain AM to Enduro EN
This wheelset also defies the special loads of an e-bike drive. The light and stable NONPLUS Components hubs as well as the excellently processed and light Newmen rims forgive a driving error. The balanced selection of components guarantees you a high level of reliability and a long service life.
Hubs
The small forge from Murr in Baden-Württemberg has been manufacturing lightweight yet stable bicycle hubs since 2018. New concepts are constantly being developed and patents registered so that new standards can also be set in the future.
A hub body, made of high-quality, hard-anodized aluminum, rotates around the elaborately sealed industrial deep groove ball bearings. This has a special ventilation system, which prevents the creation of negative pressure due to temperature fluctuations in the hub. As a result, no water is sucked through the ball bearings, which ensures a significantly longer service life and noticeably easier running of the bearings.
Thanks to high-precision manufacturing and perfect quality control, the hubs of the second generation manage without the previously used adjuster for the bearing play. This means that you always have a perfectly adjusted hub with a smooth, easy run.
The unique freewheel mechanism with bevel teeth of the NONPLUS hubs has approx. 400% more contact surface than conventional systems and enables maximum power transmission with minimal wear. The forces are transmitted over a large area instead of selectively. The 45 defined rest points immediately convert your start into propulsion without much idle travel.
rims
Like all Newmen carbon rims, the Advanced rims are made of high-end UD fibers and impress with their first-class mechanical properties and low weight. They are the ideal basis for a stable all-mountain and enduro wheelset.
The hookless construction makes them ideal for tubeless use. The significantly reinforced rim flange withstands possible punctures better and allows driving with little air pressure. In order to avoid weak points, the spoke holes were drilled in a special process.
Due to the slightly outward-facing flanks, the shape of the tire is rounder, which results in significantly better cornering grip and increased safety.
Spokes
The Race spoke is the classic from Sapim. It is a round spoke with a butted middle section of 1.8 mm in diameter. This provides more cushioning than non-tapered spokes. It also makes it easier to digest short load peaks. The Race spoke enables very stiff and stable wheels for practically every intended use . The weight including nipple is approx. 6.95g per piece. Wheel construction at R2-Bike
Our wheels are completely assembled by hand by our wheel builders. During the entire construction process, it is important that not only the concentricity is correct, but also that the spoke tension is as even as possible. The special care allows us to give a lifelong guarantee against broken spokes, as long as this was not caused by force!
You will also receive the following services for our balance bikes:
A universal impeller bag for all common sizes.
A spare spoke + nipple in all required spoke lengths so that the wheel can be repaired at short notice even after an accident.
A free initial inspection of the impeller, during which the resulting work is completely free! Only shipping costs are charged.
A crash replacement promise. If your wheel is damaged due to force majeure, we will rebuild your wheel once. We grant a 100% discount on all labor costs and only charge the material! Technical specifications:
intended use : E-Bike, All Mountain AM to Enduro EN
Impeller size: 29 “(ETRTO: 622 x 30)
Rim type: Clincher (wire and folding tires)
Brake type: disc brake
Brake disc mount: 6-hole
Weight:
1584g (Boost + Boost, SL A.30, 28 holes, Sapim Race)
1599g (Boost + SuperBoost, SL A.30, 28 holes, Sapim Race)
Note:
Due to manufacturing fluctuations for all components, deviations in weight are possible. The information is usually determined without rim tape, valves and decals / rim stickers.
The specified delivery time refers to the usual duration for the assembly of the wheelset and does not reflect the availability of the individual parts.
If you would like a special spoke on the rear wheel, e.g. for the Cannondale Ai rear triangle or for EVO6, please contact our service team. Scope of delivery:
1x complete wheelset, fully assembled (hubs, rims, spokes and nipples)
1x wheel bag
4x spare spokes including nipples
1x construction certificate
2x hologram sticker
Reviews
There are no reviews yet.