Outlet Wheelset E-Bike 29″ TR AM EN | Chris King MTB Center Lock Hubs | Newmen Aluminum Rims

Wheelset E-Bike 29 “TR AM EN | Chris King MTB Center Lock hubs | Newmen aluminum rims

intended use : E-Bike, Trail TR, All Mountain AM to Enduro EN

This wheelset also defies the special loads of an e-bike drive. The indestructible Chris King hubs and the superbly crafted Newmen rims forgive driving mistakes. The balanced selection of components guarantees you a high level of reliability and a long service life.

Hubs
There is a certain myth attached to CHRIS KING hubs. They have been on the market almost unchanged for years and yet are not old fashioned. Thanks to the proven technical inner workings, constant further development in detail and unmistakable appearance, they have developed into a true cult object.
Due to the large hub flange of the ISO hubs, shorter spokes can be used when building wheels. This not only saves weight, but also enables a very stable and durable bike.
The unmistakable sound of the freewheel is the hallmark of the rear hubs. Chris King himself called it “Angry Bee Sound”, the sound of the angry bee, which is generated by the 72 grid points of the stainless steel toothed disc. With this 3-part RingDrive system, every step is immediately converted into propulsion without a large amount of idle travel.
The heart of the hub are the ball bearings. These are also developed and produced directly by Chris King. This means that they can be fully adapted to the specific loads and forces. The multiple seals mean that water or dirt cannot penetrate.

rims
These rims deserve the predicate unbreakable. They are the perfect basis for a stable e-bike or all-mountain wheelset.
The resistance to possible damage after punctures is another 40% better than the already very solid SL A.35. Compared to rims of the same weight class, the rim flanges are much more massive and therefore more robust. Of course, they also have a completely edge-free outer contour and flared rim flanks, which give the tire a rounder shape and thus give it even more cornering grip and comfort.
The rim profile with the straight nipple contact surface is specially designed for the use of specially developed washers (MG washer) and ensures very high “spoke pull out” values with very low wall thickness in this area.

Spokes
The Race spoke is the classic from Sapim! It is a round spoke with a butted middle section of 1.8 mm in diameter. This provides more cushioning than non-tapered spokes. It also makes it easier to digest short load peaks. The Race spoke enables very stiff and stable wheels for practically every intended use . The weight including nipple is approx. 6.95 g per piece. Wheel construction at R2-Bike

Our wheels are completely assembled by hand by our wheel builders. During the entire construction process, it is important that not only the concentricity is correct, but also that the spoke tension is as even as possible. The special care allows us to give a lifelong guarantee against broken spokes, as long as this was not caused by force!

You will also receive the following services for our balance bikes:

A universal impeller bag for all common sizes.
A spare spoke + nipple in all spoke lengths required to be able to repair the wheel at short notice even after an accident.
A free initial inspection of the impeller, during which the resulting work is completely free! Only shipping costs are charged.
A crash replacement promise. If your wheel is damaged due to force majeure, we will rebuild your wheel once. We grant a 100% discount on all labor costs and only charge the material! Technical specifications:

intended use : E-Bike, Trail TR, All Mountain AM to Enduro EN
Impeller size: 29 “(ETRTO: 622 x see detailed description)
Rim type: Clincher (wire and folding tires)
Brake type: disc brake
Brake disc mount: Center Lock

Weights:

2054g (lightest variant: Boost + Boost Shimano Micro Spline, EG30, 28 holes, Sapim Race)
2294g (heaviest variant: Boost + Boost SRAM XD, EG35, 32 holes, Sapim Race)

A notice:
Due to manufacturing fluctuations for all components, deviations in weight are possible. The information is usually determined without rim tape, valves and decals / rim stickers.

The specified delivery time refers to the usual duration for the assembly of the wheelset and does not reflect the availability of the individual parts.

If you want a special spoke on the rear wheel, e.g. for the Cannondale Ai rear triangle or for the EVO6, please contact our service team. Scope of delivery:

1x complete wheelset, fully assembled (hubs, rims, spokes and nipples)
1x wheel bag
4x spare spokes including nipples
1x construction certificate
2x hologram sticker