Promotion ENVE Rim 28″ Road Bike SES 6.7 Front Disc 60 mm | 24 Holes

ENVE rim 28″ road bike SES 6.7 front disc 60 mm | 24 holes

Speed is everything for you? Then the ENVE SES 6.7 front wheel rim will be your partner. It is the ultimate basis for a stable wheelset that offers the best aerodynamics. The high flank ensures that the wind glides away and suppresses braking turbulence. At the same time, the special cross-section prevents lateral gusts from negatively affecting tracking stability. Due to the large inner width, even large-volume tires find a secure hold and you have more comfort and grip.
The ENVE engineers opted for the hookless design, which allows for perfect tubeless compatibility. Fitting and removing the tire is made much easier. In addition, a permanent seal is guaranteed. In addition, the stability at this neuralgic point increases and makes it more resistant to punctures. Despite the high flank, the weight is surprisingly low. In contrast to the previous model, this is achieved through a modified lamination.

This rim is intended for the front wheel. Together with the optionally available SES 6.7 Rear 67 mm rim, they are an unbeatable pair. According to the manufacturer, they should only be ridden tubeless.

ENVE products are engineered in the USA and manufactured to the highest quality standards at our Utah headquarters. The developers have many years of experience with the use of carbon in the field of cycling and know what requirements a top product like these carbon rims must meet. At ENVE, everything is done to use the advantages of carbon and eliminate its disadvantages. Stiff and extremely light rims were developed in which all fibers can run without interruption, which corresponds to the best possible utilization of the material strengths. This principle has been perfected in the spoke holes, in which continuous fiber strands form the mount for the spoke nipples. Aluminum inserts, which are common with other carbon rims, can therefore be dispensed with during production. This reduces the weight and at the same time allows significantly higher spoke tensions, which in turn allow the construction of stiffer wheels.

ENVE grants a 5-year manufacturer’s guarantee on the first ownership of its products. You just have to register them via their website no later than 60 days after purchase.

Handmade in USA! Technical specifications:

Area of intended use : road bike, triathlon, time trial
Materials: carbon
Rim Type: Clincher (clincher and folding)
Brake type: disc brake
ETRTO: 622×23
EARTH: 538mm
Inner width: 23 mm
Outer Width: 30mm
Rim Height: 60mm
Offset: 0 mm (symmetric)
Number of holes: 24 holes
tubeless capable: yes
ASTM classification: n/a
recommended tire width: 27 – 45 mm (aerodynamically optimized for 28 mm)
Maximum tire pressure: 4.8 bar / 69 PSI (at 113 kg driver weight and tubeless construction)
maximum system weight: not specified (driver, bike, clothing and possibly luggage)
maximum spoke tension: kA
Features: aerodynamically optimized rim profile, recommended for the front wheel
Valve hole bore: 6 mm (SV)
Finish: matte
Color: Black

Weight according to the manufacturer: 430g
Weight weighed: – Scope of delivery:

1x ENVE rim 28″ road bike SES 6.7 front disc 60 mm | 24 holes
1x tubeless set including valves and rim tape

EAN:
810024555574

MPN:
EN1012671003011001