E-bike wheelset 29 “TR AM | Newmen MTB Straightpull Center Lock hubs | DT Swiss aluminum rims
intended use : E-Bike, Trail TR to All Mountain AM
This wheelset also defies the special loads of an e-bike drive. The indestructible Newmen hubs and the excellently manufactured DT Swiss rims also forgive a driving mistake. The balanced selection of components guarantees high reliability and a long service life.
Hubs
The Newmen FADE hubs will again find many fans. You don’t have to worry about adjusting the axial bearing clearance here either. The durable, double-sealed industrial bearings are tension-free and precisely pressed in ex works. This further development has gained a high degree of user friendliness. You can spend the saved time better on your favorite trail.
The design of the freewheel is completely different from the previous model. The goal was low noise. The FADE pawl system came out. 3 pawls engage in a new type of tooth profile. To increase durability, the diameter was increased and the individual pawls were made short and wide. The resulting forces are thus distributed over a large area.
Despite the relatively low weight, safety was not spared. It is better to use a little more material in critical areas, such as. For example, at the transition between the brake disc and spoke holder, as a risk of a defect.
rims
If you want to go into the unknown with your 29er E-MTB, the HX 531 with its 30 mm internal width is the perfect choice. Due to the optimal mix of stability, weight and width, it can be driven with many different tire widths and you are therefore very flexible in choosing the intended use .
Spokes
The Race spoke is the classic from Sapim. It is a circular spoke with a butted central section 1.8 mm in diameter. This provides more cushioning than with non-tapered spokes. In addition, short peak loads can be digested better. The Race spoke enables very stiff and stable wheels for practically every intended use . The weight including nipple is approx.6.95g per piece.Wheel construction at R2-Bike
Our wheels are completely assembled by hand by our wheel builders. During the entire construction, it is important that not only the concentricity is correct, but also that the spoke tension is as even as possible. The special care allows us to give a lifelong guarantee against broken spokes, as long as this has not been caused by violence!
You will also receive the following services for our wheels:
A universal impeller bag for all common sizes.
A spare spoke + nipple in all required spoke lengths in order to be able to repair the wheel at short notice even after accidents.
A free initial inspection of the wheel, in which the resulting work is completely free! Only shipping costs are charged.
A crash replacement promise. If your wheel is damaged due to force majeure, we will rebuild your wheel once. We grant 100% discount on all labor costs and only charge the material!Technical specifications:
intended use : E-Bike, Trail TR to All Mountain AM
Wheel size: 29 “(ETRTO: 622 x 30)
Rim type: clincher (clincher and folding tire)
Brake type: disc brake
Brake disc mount: Center Lock
Weights:
1899g (Boost + Boost, HX531 rim, 28 holes, Sapim Race)
Note:
Due to production fluctuations in all components, weight deviations are possible. The information is usually determined without rim tape, valves and decals / rim stickers.
The specified delivery time refers to the usual duration for the assembly of the wheelset and does not reflect the availability of the individual parts.
If you want a special spoke on the rear wheel, e.g. for the Cannondale Ai rear triangle or for EVO6, please contact our service team.Scope of delivery:
1x complete wheelset, fully assembled (hubs, rims, spokes and nipples)
1x wheel bag
4x spare spokes including nipples
1x construction certificate
2x hologram stickers
Reviews
There are no reviews yet.