Special ENDURO BEARINGS angular contact ball bearing Stainless Steel | 6806 LLB | 30 x 42 x 7 mm (45°x1mm) Pinarello Steuersatz

ENDURO BEARINGS angular contact ball bearings stainless steel | S6806 LLB | 30 x 42 x 7 mm (45 ° x1mm) Pinarello headset

For everyone who wants to ride in any weather, the Enduro Bearings stainless steel bearings are an interesting alternative.
The 440C stainless steel used is somewhat softer than steel containing chromium, but thanks to its very good corrosion resistance when exposed to constant moisture or perspiration, it is significantly more durable. The LLB seals used and the CRC Marine Grease also prevent water and dirt from penetrating the bearing. The most important features:
– 440C stainless steel bearings
– LLB seal on both sides (labyrinth seal)
– Reduced risk of corrosion
– CRC Marine Grease Technical specifications:

Material: 440C stainless steel
Bearing type: deep groove ball bearing 6806
Dimensions AØxIØxB: 30x42x7 mm, phase 45 ° x1mm
Seal: LLB – double-sided seal
Version: corrosion-resistant
Silver

Weight according to the manufacturer: —
Weight weighed: 23.1g Scope of delivery: 1x ENDURO BEARINGS angular contact ball bearing stainless steel | S6806 LLB | 30 x 42 x 7 mm (45 ° x1mm) Pinarello headset

Note: When pressing in ball bearings, make sure that the bearing is always pressed in via the outer ring, which is also the seat of the bearing.
Example hub: The hub body bearings are pressed in there over the outer ring. The bearing may therefore only be pressed in via the outer ring. Never over the inner ring.

EAN:
811780020665

MPN:
EB8845