Top Sell REVOLOOP Tube 27,5″ | 650B REVO.MTB ultra SV 40 mm

REVOLOOP tube 27.5″ | 650B REVO.MTB ultra SV 40 mm

The REVOLOOP.MTB ultra is the declaration of war on steep climbs and was trimmed for lightweight construction. This is reflected in the product weight of just 45 grams at 29 inches. Due to the very low weight, the tube saves around 100 grams per wheel, which means that starting and climbing takes less effort and is more agile. The material formulation specially developed for this tube combines very high mechanical strength with simultaneous elasticity of the material and thus enables the innovative, specific property profile of this bicycle tube.
The valve made of particularly impact and break-resistant thermoplastic material is ahead of its time. Minimum weight paired with maximum performance. A specially designed valve base prevents damage to the tube caused by sharp edges on the rim’s valve hole. The tough plastic minimizes the potential for valve tearing during the toughest downhill rides with low air pressure.

IMPORTANT: Please never fill your REVOLOOP tube outside of the jacket with a pressure of more than 0.5 bar. Otherwise there is a risk that the REVOLOOPs will locally overstretch or even burst. Both scenarios mean that the tube is then unusable because the overstretching of the tube does not deform it back and the tube can therefore no longer be installed. Therefore: only apply a pressure of more than 0.5 bar to REVOLOOP hoses when they are fully assembled.

Light and stable – REVOLOOP valves
The valves developed by REVOLOOP are made of a special, high-strength thermoplastic polyurethane. They combine the highest technical standards with minimal weight and sophisticated design. The internally welded valve foot plate protects the tube from damage caused by sharp edges on the valve hole in the rim and the dreaded valve tearing off.

Virtually seamless – REVOLOOP welding technology
REVOLOOP’s patent-pending welding process makes it possible for the first time to weld thermoplastic hoses with large wall thicknesses in such a way that an almost even seam can be produced. This technologically sophisticated process achieves perfect rolling comfort while at the same time providing the highest level of security against failure through snakebite and punctures.

Ecologically responsible – REVOLOOP material
Thermoplastic polyurethanes are recyclable plastics. Since both the tube material and the valve are made of TPU, REVOLOOP bicycle tubes can be completely recycled. Out of responsibility towards the environment.

Made in Germany! Technical specifications:

Material: Thermoplastic Polyurethane (TPU)
Area of intended use : MTB
Compatible sizes (inches): 27.5 x 1.6 to 27.5 x 2.4
Compatible sizes (ETRTO): 42 – 584 to 60 – 584
Valve Length: 40mm
Valve standard: SV, changeable (Sclaverand, Presta)
Colour: white – transparent

Weight according to the manufacturer: 45g
Weight weighed: 44g Scope of delivery: 1x REVOLOOP tube 27.5″ | 650B REVO.MTB ultra SV 40 mm

Note: The weights of the hoses may vary due to production.

EAN:
4260573071029

MPN:
SW10016.2