Top Sell Wheelset E-Bike 29″ TR AM | Tune MTB 6-Hole Hubs | DT Swiss Aluminium Rims

Wheelset E-Bike 29 “TR AM | Tune MTB 6-hole hubs | DT Swiss aluminum rims

intended use : E-Bike, Trail TR to All Mountain AM

This wheelset also defies the special loads of an e-bike drive. The indestructible Tune hubs and the excellently processed DT Swiss rims forgive driving mistakes. The balanced selection of components guarantees you a high level of reliability and a long service life.

Hubs
The Tune hubs are classics among lightweight disc brakes. Originally developed for the MTB sector, they are now among the best options for light road, cyclo-cross and gravel wheels. They can not only be used to build lightweight and durable wheels, thanks to their 17 millimeter axle system they can be used extremely flexibly and can be converted to various axle type with minimal effort. The hub gets its high stability and strength from the manufacture of aerospace aluminum. When freewheeling the rear hub, Tune relies on the tried and tested system with 3 pawls that engage in a titanium ring with 27 teeth. The freewheel body of the Endurance rear hub has also been reinforced in order to be able to better absorb the high leverage forces in e-bike use over the long term. In addition, the ball bearings of the endurance variant are filled with a special solid lubricant, which can also cope with the use of high-pressure cleaners and adverse weather conditions.

rims
If you want to venture into the unknown with your 29er E-MTB, the HX 531 with its 30 mm mouth width is the perfect choice. Due to the optimal mixture of stability, weight and width, it can be driven with many different tire widths and you are therefore very flexible in choosing the intended use of application.

Spokes
The Race spoke is the classic from Sapim. It is a round spoke with a butted middle section of 1.8 mm in diameter. This provides more cushioning than non-tapered spokes. It also makes it easier to digest short load peaks. The Race spoke enables very stiff and stable wheels for practically every intended use . The weight including nipple is approx. 6.95 g per piece. Wheel construction at R2-Bike

Our wheels are completely assembled by hand by our wheel builders. During the entire construction process, it is important that not only the concentricity is correct, but also that the spoke tension is as even as possible. The special care allows us to give a lifelong guarantee against broken spokes, as long as this was not caused by force!

You will also receive the following services for our balance bikes:

A universal impeller bag for all common sizes.
A spare spoke + nipple in all spoke lengths required to be able to repair the wheel at short notice even after an accident.
A free initial inspection of the impeller, during which the resulting work is completely free! Only shipping costs are charged.
A crash replacement promise. If your wheel is damaged due to force majeure, we will rebuild your wheel once. We grant a 100% discount on all labor costs and only charge the material! Technical specifications:

intended use : E-Bike, Trail TR to All Mountain AM
Impeller size: 29 “(ETRTO: 622 x 30)
Rim type: Clincher (wire and folding tires)
Brake type: disc brake
Brake disc mount: 6-hole

Weights:

1911g (Boost + Boost, HX531 rim, 28 holes, Sapim Race)
1967g (Boost + Boost, HX531 rim, 32 holes, Sapim Race)

Note:
Due to manufacturing fluctuations for all components, deviations in weight are possible. The information is usually determined without rim tape, valves and decals / rim stickers.

The specified delivery time refers to the usual duration for the assembly of the wheelset and does not reflect the availability of the individual parts.

If you want a special spoke on the rear wheel, e.g. for the Cannondale Ai rear triangle or for the EVO6, please contact our service team. Scope of delivery:

1x complete wheelset, fully assembled (hubs, rims, spokes and nipples)
1x wheel bag
4x spare spokes including nipples
1x construction certificate
2x hologram sticker